blanks carbide rods
we could be your demand to produce .
Our Normal size as below :
Diameter 1mm ~80mm
Length 1mm~500mm
More Grade for your Choosing :
Grade | GRAIN SIZE üm |
Cobalt | Density (g/cm³) |
Hardness (HRA) |
TRS (N/mm²) |
KIC (MPa.m1/2) |
WB70 | 0.7 | 10 | 14.45 | 91.8 | 3800 | 10.5 |
WB60 | 0.6 | 10 | 14.45 | 92.2 | 4000 | 10.7 |
WB40 | 0.4 | 12 | 14.12 | 92.5 | 4200 | 10.2 |
WB50 | 0.5 | 8 | 14.5 | 93.2 | 4000 | 9.6 |
WB10 | 0.4 | 6 | 14.8 | 94.1 | 3800 | 8.7 |
WB20 | 0.2 | 9 | 14.45 | 94 | 4200 | 9.2 |
WB30 | 0.7 | 15 | 13.98 | 89 | 4500 | 13.8 |
WB70 | Sub-fine grain size ,processing by medium speed ,good general performance ,drill bits and end mills are recommended ,suitable for cutting ordinary alloy steel ,aluminum alloy heat resistance alloy ,cast iron ,etc. | |||||
WB60 | Ultra-fine grain size ,excellent heat resistance ,suitable for high -speed milling and drilling ,suitable to process alloy steel ,heat-resistance alloy ,cast iron ,non-ferrous metals ,stainless steel and other materials | |||||
WB40 | Ultra-fine grain size ,with good wear resistance and toughness ,especially suitable for finishing and processing alloy steel ,aluminum alloy,Titanium alloy etc ,suitable for making end mills and reamer | |||||
WB50 | Suitable for prcessing hardned hard steel ,aluminum alloy ,glass fiber reinforced materials ,high wear resistant material stainless steel ,composit graphite ,PCB ,plastic | |||||
WB10 | Ultra-fine grain size,with good wear reistant ,higher wear resistant end mill and engraving tool are recommended ,suitable for processing aluminum-magnesium alloy .composite sheet ,PCB ,plastic,glass fiber reinforced plastic etc. | |||||
WB20 | Selected high-quality 0.2um ultra -fine tungsten carbide powder ,with high wear resistance and toughness ,suitable for finishing of hardened steel ,high-precision and high-mirror processing of graphite ,plastic ,glass fiber reinforced materials,stainless steel and aluminum alloy ,suitable for making 0.25mm end mill ,drills boring tool. | |||||
WB30 | Sub-fine grain size ,with good wear resistant and toughness ,suitbable for making punching of mould ,anti-vibration boring bar etc. |
If there is anything we can do ,pls do not hesitate let us know .
E-mail :sales@wbcarbide.com
skype :carbideball
Tel : +86 0731 22778572
Mobile :+86 156 7530 2335
- Previous Product:Finishing solide rods